| 1 | #!/bin/bash
|
|---|
| 2 | #
|
|---|
| 3 | # tftp flash script for wireless routers
|
|---|
| 4 | #
|
|---|
| 5 | # Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su>
|
|---|
| 6 | # Copyright (C) 2005 by Waldemar Brodkorb <wbx@openwrt.org>
|
|---|
| 7 | #
|
|---|
| 8 | # This program is free software; you can redistribute it and/or modify
|
|---|
| 9 | # it under the terms of the GNU General Public License as published by
|
|---|
| 10 | # the Free Software Foundation; either version 2 of the License, or
|
|---|
| 11 | # (at your option) any later version.
|
|---|
| 12 | #
|
|---|
| 13 | # This program is distributed in the hope that it will be useful,
|
|---|
| 14 | # but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|---|
| 15 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|---|
| 16 | # General Public License for more details.
|
|---|
| 17 | #
|
|---|
| 18 | # You should have received a copy of the GNU General Public License
|
|---|
| 19 | # along with this program; if not, write to the Free Software
|
|---|
| 20 | # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|---|
| 21 | #
|
|---|
| 22 |
|
|---|
| 23 | if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then
|
|---|
| 24 | echo Usage: $0 firmware vendor
|
|---|
| 25 | cat << EOF
|
|---|
| 26 | IMPORTANT:
|
|---|
| 27 | Notes for Linksys / Asus WL500gx router:
|
|---|
| 28 | be sure you have set boot_wait to yes. Power on your router
|
|---|
| 29 | after executing this script.
|
|---|
| 30 |
|
|---|
| 31 | Notes for Asus WL500g router:
|
|---|
| 32 | be sure POWER led is flashing (If this is not the case
|
|---|
| 33 | poweroff the device, push the reset button & power on
|
|---|
| 34 | it again, then release button)
|
|---|
| 35 |
|
|---|
| 36 | 1) connect your pc to the LAN port
|
|---|
| 37 | 2) be sure your link is up and has an address in the
|
|---|
| 38 | 192.168.1.0/24 address range (and not the 192.168.1.1)
|
|---|
| 39 |
|
|---|
| 40 | Notes for Toshiba router:
|
|---|
| 41 | boot_wait is enabled by default on these units.
|
|---|
| 42 |
|
|---|
| 43 | 1) connect your pc to any of the four LAN ports
|
|---|
| 44 | 2) be sure your link is up and has an address in the
|
|---|
| 45 | 192.168.10.1/24 address range (and not the 192.168.10.1)
|
|---|
| 46 | 3) run this script (unit will only accept .trx images)
|
|---|
| 47 | 4) Turn unit power on.
|
|---|
| 48 |
|
|---|
| 49 | EOF
|
|---|
| 50 | exit 0
|
|---|
| 51 | fi
|
|---|
| 52 | if [ "$2" == "asus" ]; then
|
|---|
| 53 | echo Confirming IP address setting...
|
|---|
| 54 | echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1
|
|---|
| 55 | echo Flashing 192.168.1.1 using $1...
|
|---|
| 56 | echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1
|
|---|
| 57 | echo Please wait until leds stops flashing.
|
|---|
| 58 | elif [ "$2" == "linksys" ]; then
|
|---|
| 59 | echo Flashing 192.168.1.1 using $1...
|
|---|
| 60 | echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1
|
|---|
| 61 | echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1.
|
|---|
| 62 | elif [ "$2" == "toshiba" ]; then
|
|---|
| 63 | echo Flashing 192.168.10.1 using $1...
|
|---|
| 64 | echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1
|
|---|
| 65 | echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1.
|
|---|
| 66 | fi
|
|---|
